Safe checks before you call
- Remove boxes, tools, leaves, or snow from the sensor beam near the floor.
- Wipe both lenses with a clean, soft cloth.
- Look for a bracket that was bumped or twisted.
- Check the indicator lights without moving any wiring.
If one light is dark or blinking after the path is clear, the sensors may be misaligned, a wire may be loose, or one photo-eye may have failed.
What sensor service covers
We check power at the opener, low-voltage wiring, connections, brackets, lens alignment, and the response at the motor head. Then we test the door with the beam clear and blocked. A sensor repair is complete only when the opener stops and reverses as designed.

When the sensors are not the cause
A door can also reverse because it binds in the track, the close limit is wrong, or the opener senses too much resistance. If the lights look normal but the door still turns around, we test the door by hand and inspect rollers, tracks, balance, and opener settings. Visit our opener repair page for other common symptoms.
Do not bypass the safety system
Do not tape a wall button down, jumper the sensor wires, or mount the photo-eyes above the required position. The beam protects people, pets, and objects in the doorway.
Call (330) 947-4591 with the opener brand and tell us which sensor lights are steady, blinking, or dark.




