Find where the gap begins
Close the door during daylight and look from inside the garage. A bright line along the floor points to the bottom seal. Light at the sides or top points to the stop molding. A gap at only one corner can also mean the floor slopes or the door is not level, so the seal should not be blamed until the door position is checked.
Bottom seal and perimeter seal do different jobs
The bottom seal slides or presses into a retainer on the lowest section. It compresses against the concrete and helps block rain, slush, leaves, and small pests. The perimeter weatherstrip sits on the frame and meets the outside face of the closed door. Together they limit direct drafts around the opening.
We identify the retainer shape, measure the door, inspect the threshold, and choose a seal profile that can compress without folding under the door.

Ohio winter details
Road salt and frozen slush can make an old seal stiff and brittle. A seal frozen to the slab can also hold the door down while the opener keeps pulling. Clear snow from the threshold and avoid forcing the opener against ice. Our frozen door guide explains safe first steps.
What the service includes
- Inspection of the door position, threshold, retainer, and existing seal
- Removal of loose or damaged material
- Installation and trimming of the compatible replacement
- A complete close test to check contact across the width
Call (330) 947-4591 with the approximate door width and a photo of the bottom edge or side molding.




